Most Professional & Reliable Manufacturer & Supplier of Stainless Steel Products

Your Position:  Home>Products>Stainless Steel Wire & Rod

316L Stainless Steel Wire Rope

Haosteel is professional manufacturer and supplier of 316L Stainless Steel Wire Rope. Quality guaranteed, On-time delivery, After-sales warranty.

 

Standard: 

ASTM A580/A313

Grade:

316L

Delivery:

Cold drawn  Hot rolled

Surface:

bright, cloudy,plain,black bright, matt

diameter:

0.05-25mm

Type

spring,welded,tig,mig etc soft and hard

Length: 

as your requirement

Raw material:

Tisco, Jisco, Baosteel, etc.

Delivery time:

15 days in common

 

Description:

Type 316L is a low carbon austenitic chromium-nickel stainless steel with corrosion resistance similar to type 316 but with resistance to intergranular corrosion following welding.

 

Chemical composition:

C

Si

Mn

P

S

Cr

Ni

Mo

≤ 0.03

≤ 1.00

≤ 2.00

≤ 0.045

≤ 0.03

16.00 - 18.00

10.00 - 14.00

2.0-3.0

 

Physical Properties:

Annealed:
Ultimate Tensile Strength –620 MPA min
Yield Strength (0.2% Offset) – 310 MPA min
Elongation – 30% min

 

Heat Treatment:
316L is non hardenable by heat treatment.

 

Tempered:
Type 316L can be cold rolled to achieve the temper properties required by specific customers and/or manufacturing requirements. For tempers 1/2 hard or above consult Haosteel Technical Services for more information.

Construction:1 x7,1 x19,1 x37,7 x7,7 x19,6 x19S/W+IWRC,6 x36SW+IWRC,19 x7 etc.
Surface:bright, cloudy,plain,black
Packagingpvc or wooden reel, pallets, wooden box or customized wooden or plastic spools and craft paper (inner) stong wooden pallet or according to request(outer)
StandardASTM A240,GB/T3280-2007,JIS4304-2005,ASTM A167,EN10088-2-2005
Tensile strength1470MPa/1570MPa/1670MPa
Main applicationlifting, fixing, cableway, hanging,supporting, refloatation. haulage, etc

Different of core
FC stands for fiber core
Made of natural or synthetic fiber, which can provide excellent flexibility and resistance to contact pressure.
The fiber core can store lubrication to reduce the friction between wire strands effectively. Meanwhile, the fiber core makes the rope lower deformable with low elastic rope elongation.
WSC is abbreviation of wire strand core. WSC ropes features better heat resistance than FC ropes, meanwhile, increase metallic section provide added 15% of strength. 
However, WSC steel ropes are less flexible than those with fiber cores.
IWRC is short for independent wire rope core, which strengths the rope, reduce tensile stress in individual wires as well as makes the ropes more resistant to crushing.
At the same time, IWRC wire ropes have the maximum heat resistance than others FC or WSC ropes. Cross laid wire rope means each wire of different layers contacts in points and has relatively large spaces between wires. 
It is extremely flexible and generally used in slings. Compared with parallel laid wire rope, this one has smaller contact area which makes it easier to fail due to fatigue and shear over time.
Parallel laid wire rope has wider contact areas with minimal breaks caused by inside abrasion. 
They boast low bending fatigue and higher breaking load without any destruction of strand shapes taking advantages of their tight structure. Normally, parallel laid wire ropes can be classified into four types: seale type (S), filler wire type (F), warrington type (W) and warrington & seale type (WS) as shown below:

 

Our advantage:

Our range of Wire made of Stainless Steel are not only known for their variety but are also known for their good quality, long life and very reasonable prices. Quality and service is our first priority, we effectively use technically advanced machinery equipment and the expertise of our work to deliver our stainless steel wired products





Online Inquiry
We will reply within 12 hours.