搜索
Search
img

NEWS

>
>
>
Basic knowledge of precision stainless steel seamless steel pipe
Check category

Basic knowledge of precision stainless steel seamless steel pipe

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2021-01-20 17:10
  • Views:

(Summary description)

Basic knowledge of precision stainless steel seamless steel pipe

(Summary description)

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2021-01-20 17:10
  • Views:
Information

Precision stainless steel seamless steel pipe according to the production method can be divided into: hot-rolled seamless pipe, cold drawing tube, precision steel tube, thermal expansion pipe, tube and pipe extrusion cold spinning.
Precision stainless steel seamless steel tubes for the structure (GB/T8162-2008) is used for seamless steel tube general structure and mechanical structure of the.
The precise stainless steel seamless steel pipe conveying fluid (GB/T8163-2008) is generally used for seamless steel pipe conveying water, oil, gas and other fluid.
The precision stainless steel seamless steel tubes for low and medium pressure boiler (GB/T3087-2008) is used in the manufacture of various structures of low and medium pressure boiler superheated steam pipe, steam pipe, boiling water pipe and boiler flue tube, pipe and brick arch tubes of high quality carbon steel hot rolling and cold drawing (rolling) seamless steel tube.
The precision stainless steel seamless steel pipe for high pressure boiler (GB5310-2008) is used for heating surface tube boiler manufacturing high and higher pressure of high quality carbon steel, alloy steel and stainless steel seamless steel pipe.
The high precision stainless steel seamless steel pipe for chemical fertilizer equipment (GB6479-2000) is applied to the working temperature of -40~400, the working pressure for chemical equipment and pipeline of 10~30Ma high quality carbon steel and alloy steel seamless steel pipe.
Such as precision stainless steel seamless pipe for petroleum cracking (GB9948-2006) is the seamless steel pipe used in oil refinery furnace tubes, heat exchangers and pipe.
, steel tubes for drilling (YB235-70) is for the Geological Department of the steel core drilling use, use can be divided into drill pipe, drill collar, core pipe, casing and precipitation etc..
8 diamond core drilling seamless pipe (GB/T3423-82) is used for seamless steel pipe, core rod, casing of diamond core drilling.
Oil drilling pipe, seamless steel pipe (YB528-65) is used for oil drilling in the thick thick or ends. Sub car steel wire and wire the two cars, car fittings connecting wire tubes, the methods and tools of threading work butt joint.
We use carbon steel seamless pipe (GB5312-2009) ship manufacturing ship I level pressure piping, II level pressure piping,
Boiler and Superheater carbon steel seamless steel pipe. Carbon steel seamless steel pipe wall temperature does not exceed 450 degrees, alloy steel seamless steel pipe wall temperature exceeding 450 DEG C.
2 automotive half shaft casing seamless steel pipe (GB3088-82) is the manufacture of automobile axle casing and drive axle shell tubes of high-quality carbon structural steel and alloy structural steel hot-rolled seamless steel tube.
The diesel engine with high pressure tubing (GB3093-2002) is the manufacture of high-pressure diesel injection systems for seamless steel pipe.
People with precision internal diameter seamless steel tube for hydraulic and pneumatic cylinder (GB8713-88) is a manufacturer of hydraulic and pneumatic cylinder with precision diameter with cold drawn or cold-rolled precision seamless steel tube.
All the cold drawn or cold rolled precision seamless steel tube (GB3639-2000) is used for precision mechanical structure, hydraulic equipment and high surface finish of cold drawn or cold-rolled precision seamless steel tubes.
Stainless steel seamless steel tubes and structure (GB/T14975-2002) is widely used in chemical, petroleum, hot-rolled stainless steel made of textile, medical, food, machinery and other industrial anti-corrosion pipes and structural parts and parts of the (extrusion, expansion) and cold drawing (rolling) seamless steel tube.
Stainless steel seamless tubes for fluid delivery network (GB/T14976-2002) is used for the transmission fluid made of stainless steel hot-rolled (extrusion, expansion) and cold drawing (rolling) seamless steel tube.
Development of seamless steel tube is in addition to general tube other than the section shape of seamless steel tube. According to the different shapes and sizes of steel pipe section can be divided into equal wall thickness special-shaped seamless steel pipe (code named D), unequal wall thickness special-shaped seamless steel pipe (code named BD), variable diameter special-shaped seamless steel pipe (code named BJ). Shaped seamless steel pipe widely used in various structural parts, tools and machinery parts. Compared with the circular tube, the special-shaped tube generally has larger inertia moment and section modulus, and has larger bending torsion resistance ability, can greatly reduce the structural weight, save steel.

Scan the QR code to read on your phone

Recommended News

When buying stainless steel products, authenticity, processing precision, and after-sales service are the key factory
When buying stainless steel products, authenticity, processing precision, and after-sales service are the key factory
In the price-competitive environment of the stainless steel industry, many buyers treat unit price as the sole criterion for selection, ultimately falling into the trap of "low-cost procurement followed by high-cost rework." In reality, as a fundamental industrial material, stainless steel incurs costs throughout the entire lifecycle—from procurement and processing to operation and maintenance. Three key factors—material authenticity, processing precision, and after-sales service—are far more valuable than simply achieving low purchase prices.  Material authenticity is the minimum requirement when purchasing stainless steel, and also a common target for low-price traps. Some low-cost suppliers on the market often pass off inferior materials as high-quality ones—using 201 instead of 304, ordinary 304 instead of 316L, or recycled materials with non-standard thickness and subpar composition. Although these materials may appear only slightly cheaper, they can lead to premature corrosion, insufficient strength, and other issues during use, potentially causing safety incidents in chemical or food processing environments. Reputable, physical suppliers provide material quality certificates with each shipment and support spectral testing for verification, ensuring complete consistency in material composition and grade from the source.  Processing accuracy directly determines the yield rate and schedule of downstream operations. In stainless steel processing stages such as leveling, slitting, and cutting, there are clear industry standards for dimensional tolerances, flatness, and burr control. Low-cost processing often involves outdated equipment and lax quality control, resulting in excessive slit width tolerances, warped or uneven leveled sheets, and excessive burrs on cut edges. These issues can increase scrap rates in subsequent sheet metal and stamping processes, and even delay overall project timelines due to dimensional mismatches. Although high-precision processing has a slightly higher unit price, it significantly reduces rework and waste downstream, ultimately leading to lower overall costs.  Reliable after-sales service is a crucial guarantee for long-term and stable procurement. Low-cost suppliers often lack service capabilities; when issues such as material discrepancies or dimensional deviations arise, they tend to shirk responsibility and delay responses. Some small-scale vendors even lack established after-sales channels, making it difficult to hold them accountable for quality problems. In contrast, trustworthy manufacturing factories offer end-to-end support services, including product selection consultation, order tracking, handling of abnormalities, and timely replacement or reshipment, all backed by clear response mechanisms that significantly reduce buyers' communication and time costs.  From a total lifecycle cost perspective, pursuing low prices alone often proves counterproductive. Low-quality materials at lower prices may have a service life only one-third that of qualified products. When combined with hidden costs such as rework, production downtime, and equipment replacement, the overall expenditure can far exceed the cost of purchasing standard-quality materials. Procurement calculations should not focus solely on unit purchase price, but must also consider the comprehensive investment in material lifespan, processing losses, and operational maintenance costs.  The essence of stainless steel procurement lies in selecting reliable long-term suppliers, rather than simply opting for the lowest single price. By balancing cost and quality, and prioritizing material grade, precision, and service, true cost reduction and efficiency improvement can be achieved, ensuring stable progress in production and projects.
See more information
In the price-competitive environment of the stainless steel industry, many buyers treat unit price as the sole criterion for selection, ultimately falling into the trap of "low-cost procurement followed by high-cost rework." In reality, as a fundamental industrial material, stainless steel incurs costs throughout the entire lifecycle—from procurement and processing to operation and maintenance. Three key factors—material authenticity, processing precision, and after-sales service—are far more valuable than simply achieving low purchase prices.  Material authenticity is the minimum requirement when purchasing stainless steel, and also a common target for low-price traps. Some low-cost suppliers on the market often pass off inferior materials as high-quality ones—using 201 instead of 304, ordinary 304 instead of 316L, or recycled materials with non-standard thickness and subpar composition. Although these materials may appear only slightly cheaper, they can lead to premature corrosion, insufficient strength, and other issues during use, potentially causing safety incidents in chemical or food processing environments. Reputable, physical suppliers provide material quality certificates with each shipment and support spectral testing for verification, ensuring complete consistency in material composition and grade from the source.  Processing accuracy directly determines the yield rate and schedule of downstream operations. In stainless steel processing stages such as leveling, slitting, and cutting, there are clear industry standards for dimensional tolerances, flatness, and burr control. Low-cost processing often involves outdated equipment and lax quality control, resulting in excessive slit width tolerances, warped or uneven leveled sheets, and excessive burrs on cut edges. These issues can increase scrap rates in subsequent sheet metal and stamping processes, and even delay overall project timelines due to dimensional mismatches. Although high-precision processing has a slightly higher unit price, it significantly reduces rework and waste downstream, ultimately leading to lower overall costs.  Reliable after-sales service is a crucial guarantee for long-term and stable procurement. Low-cost suppliers often lack service capabilities; when issues such as material discrepancies or dimensional deviations arise, they tend to shirk responsibility and delay responses. Some small-scale vendors even lack established after-sales channels, making it difficult to hold them accountable for quality problems. In contrast, trustworthy manufacturing factories offer end-to-end support services, including product selection consultation, order tracking, handling of abnormalities, and timely replacement or reshipment, all backed by clear response mechanisms that significantly reduce buyers' communication and time costs.  From a total lifecycle cost perspective, pursuing low prices alone often proves counterproductive. Low-quality materials at lower prices may have a service life only one-third that of qualified products. When combined with hidden costs such as rework, production downtime, and equipment replacement, the overall expenditure can far exceed the cost of purchasing standard-quality materials. Procurement calculations should not focus solely on unit purchase price, but must also consider the comprehensive investment in material lifespan, processing losses, and operational maintenance costs.  The essence of stainless steel procurement lies in selecting reliable long-term suppliers, rather than simply opting for the lowest single price. By balancing cost and quality, and prioritizing material grade, precision, and service, true cost reduction and efficiency improvement can be achieved, ensuring stable progress in production and projects.
8 requirements for the production of dual-phase steel heat exchange tubes
8 requirements for the production of dual-phase steel heat exchange tubes
The role of stainless steel U-tube in heat exchanger!
The role of stainless steel U-tube in heat exchanger!
How is the bearing capacity of stainless steel heat exchanger tube affected?
How is the bearing capacity of stainless steel heat exchanger tube affected?
Previous page
1
2
…
14

©  Haosteel Group Co., Limited  沪ICP备2025133794号-1

Website Construction: www.300.cn 

搜索
Search