PRODUCT CENTER
Incoloy 330 N08830 Nickel Base alloy steel bar
Incoloy 330 N08830 Nickel Base alloy steel bar
Haosteel is professional manufacturer and supplier of Nickel based Incoloy 330 N08830 alloy steel bar. Quality guaranteed, On-time delivery, After-sales warranty.
Incoloy is a nickel ferrochrome alloy designed for oxidation and carbonation at elevated temperatures.Incoloy alloy has many kinds: common such as Incoloy800, Incoloy800H, Incoloy800HT, Incoloy825, Incoloy840, Incoloy901, Incoloy925, Incoloy20, Incoloy330, Incoloy 25-6mo, etc.The alloy contains a small amount of the metallic elements molybdenum and copper.In reductive acid and oxidizing acid, it has good corrosion resistance, as well as good resistance to stress corrosion cracking, pitting and crevice corrosion.It has excellent corrosion resistance to sulfuric acid and phosphoric acid.The alloy has good cold and hot working properties and is easy to be formed and welded.The main products of this alloy are rods, tubes, plates, strips, wires and forgings, etc. It is mainly used in the chemical, petrochemical, nuclear and rare metal refining industries.
Incoloy 330 alloy steel bar forging
N08830 alloy steel bar forging
Description:
Incoloy 330 (N08330) is a nickel-iron-chromium austenitic alloy designed for oxidation and carburization in high temperature environments. The nickel content of 34% to 37% gives the material a high resistance to chloride stress corrosion cracking and sigma phase precipitation embrittlement. The material is processed by standard machining procedures for stainless steel and nickel alloys. It is widely used in the environment of combination of cyclic heating and carburizing to resist corrosion. Incoloy 330 stainless steel is an austenitic heat and corrosion resistant alloy with a combination of strength and resistance to carburization, oxidation and thermal shock resistance. This alloy is designed for use in high temperature industrial environments where the combined effects of carburization and thermal cycling are necessary, such as in the heat treatment industry. Carburizing and oxidation resistance to about 2100 °F is an increase in the silicon content of the alloy.
Complete specifications, stock in stock
Strip, sheet (thick plate, medium plate, sheet, steel plate), bar (black bar, light bar, grinding bar, round bar, square bar, steel bar), pipe (capillary, seamless pipe, steel pipe), Forgings (flanges, elbows, bolts, nuts, tees), welding consumables (welding rods, welding wire, welded pipes), wire and other materials.
Chemical Composition Of Incoloy 330
|
C≤ |
Si≤ |
Mn≤ |
P≤ |
S≤ |
Cr≥ |
Ni≥ |
Mo≥ |
Cu≤ |
|
0.08 |
0.75-1.50 |
2.00 |
0.030 |
0.030 |
17.0-20.0 |
34.0-37.0 |
1.0-1.75 |
1.00 |
|
|
Sn≤ |
Pb≤ |
Ti≤ |
Fe≤ |
Co≤ |
V≤ |
W≤ |
Nb≤ |
|
0.025 |
0.005 |
- |
- |
- |
- |
- |
- |
Physical properties of Incoloy 330 (N08830) nickel-based alloy:
1. Incoloy 330 (N08830) nickel base alloy density:
(1) 8.08 g/cm3 (grams per cubic centimeter).
(2) 0.292 lb/in3 (pounds per cubic inch).
2, Incoloy 330 (N08830) nickel-based alloy specific heat:
(1): 0.11 BTU/lb/°F (32 - 212°F) (British heat/pounds/Fahrenheit).
(2): 460 Joules/kg/°C (0 - 100°C) (Coke/kg/Celsius).
3, Incoloy 330 (N08830) nickel-based alloy magnetic permeability: 1.02 at 70 °F / 20 ° C
Incoloy 330 (N08830) nickel base alloy corrosion resistance:
Incoloy 330 (N08830) has excellent corrosion resistance, especially for oxidation, carburizing and nitriding environments. In an aqueous medium environment, the chromium component of 330 is resistant to oxidative environmental corrosion, and the nickel component enhances resistance to reducing corrosion. The high nickel content of the alloy gives the material a strong resistance to chloride stress corrosion cracking and sigma phase embrittlement.
Incoloy 330 (N08830) nickel-based alloy oxidation resistance:
Incoloy 330 (N08830) has excellent oxidation resistance and excellent anti-fouling ability at temperatures up to 2000°F (1095°C). Any oxide scale will adhere tightly to the surface of the material, especially under alternating thermal and thermal cycling conditions.
Incoloy 330 (N08830) nickel-based alloy carburization resistance:
35% nickel and a certain amount of silicon give the material excellent resistance to carburization. Alloy 330 exhibits excellent resistance to "green rot" in alternating environments of carburization and oxidation.
Incoloy 330 (N08830) Ni-based alloy heat treatment:
Incoloy 330 (N08830) is an austenitic stainless steel that cannot be hardened by heat treatment. Hardening can only be achieved by cold working to reach room temperature strength. For most high temperature applications, 330 is not annealed after cold forming or welding. If the material needs to be completely annealed, it should be carried out at a temperature range of 1870-2050 °F (1020-1120 °C). Water quenching of the material gives the best creep resistance, but the same effect can be achieved by rapidly cooling to below 800 °F (425 °C).
Incoloy 330 (N08830) nickel base alloy manufacturing:
Incoloy 330 (N08830) alloys can be hot formed or cold formed using standard procedures for austenitic stainless steels and nickel alloys. The work hardening rate of the alloy can be compared to other austenitic stainless steels. It is recommended to shape the material at room temperature. If the material requires hot working, the material should be uniformly heated to 2050-2150 °F (1120-1180 °C) and then lowered to 17501⁄4 °F (950 °C) for thermal insulation. The material should be cooled by water quenching.
We recommend annealing after hot working to ensure the best corrosion resistance and optimum grain structure of the material. The material cannot be forged or bent in the range of 1200-1600 °F (650-870 °C) because the ductility of the material is low in this temperature range, which may cause the intergranular structure of the austenitic alloy material to rupture.
Incoloy 330 (N08830) nickel-based alloy welding:
Incoloy 330 (N08830) can be welded by tungsten arc welding, electrode welding and plasma arc machining, and the best corrosion resistance is obtained by tungsten arc welding. Prior to welding, the material should be annealed and kept clean and free of dirt, grease and other impurities. Grinding should be performed within one inch of both sides of the joint. The temperature between the solder layers should not exceed 300 °F (150 °C), and heat treatment is not required before or after soldering. Alloy 330 can be welded to different types of metals.
Product Details:
|
Product Name |
Good strength Incoloy 330 alloy steel |
|
Material |
Monel/Inconel/Hastelloy/Duplex Steel/PH Steel/Nickel Alloy |
|
Shape |
Round,Forging,Ring,Coil,Flange,Disc,Foil,Spherical,Ribbon,Square,Bar,Pipe,Sheet |
|
Grade |
Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904L |
|
Others: 253Ma,254SMo,654SMo,F50(UNS S32100)F60,F61,F65,1J22,N4,N6 etc |
|
|
Alloy : Alloy 20/28/31; |
|
|
Hastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g; |
|
|
Hastelloy B / UNS N10001,Hastelloy B-2 / UNS N10665 / DIN W. Nr. 2.4617,Hastelloy C,Hastelloy C-4 /UNS N06455 / DIN W. Nr. 2.4610,Hastelloy C-22 / UNS N06022 / DIN W. Nr. 2.4602,Hastelloy C-276 / UNS N10276 / DIN W. Nr. 2.4819,Hastelloy X / UNS N06002 / DIN W. Nr. 2.4665 |
|
|
Haynes: Haynes 230/556/188; |
|
|
Inconel 600/601/602CA/617/625/713/718/738/X-750,Carpenter 20; |
|
|
Inconel 718 / UNS N07718 / DIN W. Nr. 2.4668,Inconel 601 / UNS N06601 / DIN W. Nr. 2.4851,Inconel 625 / UNS N06625 / DIN W. Nr. 2.4856,Inconel 725 / UNS N07725,Inconel X-750 / UNS N07750 / DIN W. Nr. 2.4669,Inconel 600 / UNS N06600 / DIN W. Nr. 2.4816 |
|
|
Incoloy: Incoloy 330/800/800H/800HT/825/901/925/926; |
|
|
GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044 |
|
|
Monel: Monel 400/K500/R405 |
|
|
Nitronic: Nitronic 40/50/60; |
|
|
Nimonic: Nimonic 75/80A/90/A263 ; |
|
|
Specification |
Wire: 0.01-10mm |
|
Product |
1.According to the preparation process can be divided into deformation superalloys, |
|
Standard |
GB,AISI,ASTM,DIN,EN,SUS,UNS etc |
|
Inspection |
ISO,SGS,BV and so on. |
|
Packaging |
1. cases packed in wooden cases |
Incoloy 330 (N08830) specifications and availability:
1. Variety classification: Shanghai Haosteel Co., Ltd. can produce seamless pipes, steel plates, round steels, forgings, flanges, rings, welded pipes, steel strips, wire materials and supporting welding materials of various specifications.
2, delivery status: seamless pipe: solid solution + acid white, length can be fixed; sheet: solid solution, pickling, trimming; welded pipe: solid solution acid white + RT% flaw detection, forgings: annealing + car light; The bar is in the state of forging, surface polishing or car light; the strip is cold-rolled, solid solution soft, and descaled; the wire is solid-dissolved and acid-washed, or straight, solid solution Light state delivery.
Application areas:
1. Furnace container carburizing, carbonitriding, forgeable annealing
2, muffle furnace, distillation tank
3, pole rack heat treatment basket
4, quenching device
5, radiant tube
6, salt basin
7, furnace fan and shaft
8, conveyor
9, pipe hanger crude oil heater ADN steam boiler
10, heat exchanger
Packaging & Shipping
Packaging:Products are generally supplied in standard cardboard boxes, pallets, wooden boxes. Special packaging requirements can also be accommodated. (also depend on the customers' requirements)
Shipping: We cooperation with many logistics company,We can provide express, sea transportation, air transportation, and rail way transportation based on customers' requirement.
Our Services
1) We can provide a free sample for testing.
2) Customized lable, packing, OEM service
3) Mill test certificate will be provided after production, If it is necessary.
4) Good packing methods to keep goods no damage during delivery
5) We are cooperation with many famous forwarder, will try our best to choose the safty, convenience, quick, and cheap mode of transportation for our customers. 
© Haosteel Group Co., Limited 沪ICP备2025133794号-1
Website Construction: www.300.cn