PRODUCT CENTER
1050 aluminum sheet aluminum alloy strip coil
Haosteel group co., limited is a set of aluminum and aluminum alloy production and operation in one of the comprehensive enterprises, the main products are aluminum and aluminum alloy plate, aluminum coil, aluminum strip, aluminum foil, aluminum rod, aluminum tube, aluminum wire, aluminum ingots and other products.
1050 aluminum sheet plate
Thickness: 1-500mm
Status: F,O,H12,H14,H16, H18,H19,H22,H24, H26,H28,H111, H112,H114
Starting quantity: according to customer demand production
Typical applications: heat sink, signage, electronics, lamps, nameplates, electrical appliances, stamping parts
1050 aluminum sheet product introduction
1050 aluminum plate contains more than 99.5% aluminum, is a kind of industrial pure aluminum. 1050 aluminum plate has the characteristics of high plasticity, corrosion resistance, good electrical and thermal conductivity, but the strength is low. HAOSTEEL has advanced equipment, mature technology and a strong technical team, 1050 aluminum plate production technology skilled, stable quality, price concessions. The company through the selection of raw materials, the implementation of 6S management system in production, layers of quality inspection, strict control, to ensure that 1050 aluminum plate pass rate is high.
1050 aluminum alloy material is a product in the pure aluminum plate series, and the chemical composition and mechanical properties of 1060 series products are close, and the current application is basically replaced by 1060 aluminum plate strip. The last two Arabic digits of the 1050 series are 50, and according to the international brand naming principle, the aluminum content must reach 99.5% or more for qualified products. China's aluminum alloy technical standard (GB/T3880-2006) also clearly stipulates that the aluminum content of 1050 reaches 99.5%. Because it does not contain other technical elements, the production process is relatively single, the price is relatively cheap, and it is the most commonly used series in conventional industry. Industrial pure aluminum has the characteristics of high plasticity, corrosion resistance, good electrical and thermal conductivity, but low strength, not strengthened by heat treatment, poor machinability, can accept contact welding, gas welding.
Products are widely used in aerospace, mold, instrumentation, chemical industry, construction, packaging, anti-corrosion insulation, air conditioning, solar energy, refrigerator and other industries.
1050 Aluminum plate specifications
|
Aluminum plate alloy grade |
Aluminum plate state |
Thickness（mm） |
Width（mm） |
Length（mm） |
aluminum plate application |
|
1050 Aluminum plate |
F,O,H12,H14,H16, H18,H19,H22,H24, H26,H28,H111, H112,H114 |
0.05-16 |
100-2650 |
500-16000 |
Curtain wall panel, lamp, PS board base Materials, signs, etc |
1050 aluminum plate chemical composition
|
Chemical% |
||||||||||||||
|
Grade |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Ni |
Zn |
V |
Ti |
Zr |
Other |
AL |
Re |
|
1050 aluminum plate |
0.25 |
0.40 |
0.05 |
0.05 |
0.05 |
- |
- |
0.05 |
0.05 |
0.03 |
- |
0.03 |
99.50 |
- |
Mechanics Performance Testing
Tensile strength σb (MPa):60~100
Elongation δ/(%):≥23
Elongation 50mm/(%):≥25
Note: longitudinal mechanical properties of pipe at room temperature
Sample size: all wall thicknesses
Heat treatment specification:
1) Full annealing: heating 390~430℃; With the different effective thickness of the material, the holding time is 30~120min; At the speed of 30~50℃/h, the furnace is cooled to 300℃, and then air cooling.
2) Rapid annealing: heating 350~370℃; With the different effective thickness of the material, the holding time is 30~120min; Air or water cooling.
3) Quenching and aging: quenching 500~510℃, air cooling; Artificial aging 95~105℃,3h, air cooling; Natural aging at room temperature 120h.
1050 aluminum plate is widely used
1050 pure aluminum plate is often used in daily necessities, lighting appliances, reflective panels, decorations, chemical industry containers, heat sinks, signs, electronics, lamps, nameplates, electrical appliances, stamping parts and other products. In some occasions that require high corrosion resistance and formability, but the strength requirements are not high, chemical equipment is its typical use.
Our company timely delivery, high quality and low price, good service. Common specifications are available in stock; Special size can be customized according to customer requirements processing, delivery time: about seven days.
© Haosteel Group Co., Limited 沪ICP备2025133794号-1
Website Construction: www.300.cn